Menhover* Silicone BL-6868 是特别设计用于制备低K值的聚氨酯硬质泡沫体的有机硅表面活性剂。适合冰箱,电热器及夹芯板等泡沫,具有超低的 Lambda 值。适合环戊烷和HFOs发泡剂体系。 Menhover* Silicone BL-6868 建议使用量为1-2.5 份
Product Description |
Menhover* Silicone BL-6848 a non-hydrolysable polyether silicone surfactant for the manufacturing of polyurethane rigid foam. BL-6848 is well suitable for all flow demanding applications, such as appliance and discontinuously produced sandwich insulation panels. It offers a very high nucleation support for very low lambda values. This surfactant can be used with all common blowing agents, such as pentanes, HFCs and HFOs. The applied concentration of BL-6848 is between 1.0 to 3.0 parts per 100 polyols. The optimal concentration will depend on specifics of the formulation. |
* Fine cells and low Lambda, * Minimized tendency to form cavities and subsurface voids * Extremely high nucleation potency and good foam flow * Works very efficiently in highly activated fast reacting systems but is suitable for slower systems as well. * Workds well in highly activated fast reacting systems or in systems based on aromatic starters |
Properties |
Appearance | Clear liquid | |
Specific gravity @ 25 0C | 1.020-1.050 | ||
Viscosity, mPa.s @ 25 0C | 400-1000 | ||
Calculated OH number | 125 mg KOH/g | ||
Package |
210KGDrum |
||
Safety and handing informatiion SHIPPING, STORAGE AND HANDLING |
Due to the enhanced hydrophobic character of BL-6848 , its use may cause some haziness in common rigid foam systems, Solidification point: below 5 °C, advised storage temperature is 20-35 °C,. Safety and handing information is contained in the BL-6848 surfactant Material safety Data Sheet, available upon request from Menhover. Recommends that our surfactants be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences. The optimum storage temperature is between 15- 40°C. |